TN Airsoft Forums
Airsoft forum dedicated to promoting collaboration among active Airsoft enthusiasts within the TN area.
classic army lwrc m6?
Moderators: dogsoldier, Skidude, Sniper
3 posts • Page 1 of 1
classic army lwrc m6?
by Mastersamurai » Sun Nov 06, 2011 4:59 pm
Ok so i bout this gun and it has a jamming problem really bad. The front sight and entire outer barrel is really wobbly too. Any one have any idea how to fix this?
- Mastersamurai
- Posts: 33
- Joined: Thu Jan 06, 2011 11:42 pm
Re: classic army lwrc m6?
by David Charlton » Mon Nov 07, 2011 9:01 am
Hi...
Yeah it will jam once in a while because its so light it flexes as it fires. Rapid firing you may get 1 jam every 2 or 3 large capacity magazine dumps. Low Profile Case LWRC M6 w/ Mid Length Gas Piston System Fixed "A" frame front sight LWRC Free Float Rail Danial Defense Rail Sling Mount. We had a M6 with a scope that sat that low, and we didn't have any problems with the front sight. We thought we would, but it didn't show up in the scope at all.
Regards,
David
Yeah it will jam once in a while because its so light it flexes as it fires. Rapid firing you may get 1 jam every 2 or 3 large capacity magazine dumps. Low Profile Case LWRC M6 w/ Mid Length Gas Piston System Fixed "A" frame front sight LWRC Free Float Rail Danial Defense Rail Sling Mount. We had a M6 with a scope that sat that low, and we didn't have any problems with the front sight. We thought we would, but it didn't show up in the scope at all.
Regards,
David
A great war leaves the country with three armies - an army of cripples, an army of mourners, and an army of thieves.
- David Charlton
- Posts: 20
- Joined: Mon Jul 04, 2011 9:21 am
Re: classic army lwrc m6?
by Sigmarius » Tue Dec 13, 2011 9:10 pm
I have an m6a2 that I put about 20 mid caps through over the course of a weekend, and it fed flawlessly.
The post above makes no sense, grammatically or, from what I understand, mechanically.
The only thing I can think of is that the outer barrel isn't secured properly, and the vibration of the gun firing is making it flex. Or, maybe the rails aren't attached right and they are hitting the outer barrel. Maybe both.
Honestly, I don't know. I'm not a tech. I'm just throwing out random thoughts.
The post above makes no sense, grammatically or, from what I understand, mechanically.
The only thing I can think of is that the outer barrel isn't secured properly, and the vibration of the gun firing is making it flex. Or, maybe the rails aren't attached right and they are hitting the outer barrel. Maybe both.
Honestly, I don't know. I'm not a tech. I'm just throwing out random thoughts.
-
Sigmarius - Posts: 929
- Joined: Sun May 18, 2008 6:42 pm
- Location: Alcoa, TN
3 posts • Page 1 of 1
Who is online
Users browsing this forum: No registered users and 6 guests