by noopie45 » Mon Dec 26, 2011 7:13 pm
I recently assembled my JG BAR 10, and I very quickly encountered a problem. When I pull the bolt back to cock the spring, the bolt get's stuck right before it can get in the firing position. I have a hunch it's the magazine feeding too many BBs into the gun. When it jams, I have to take the mag out and let the BBs fall out. I finish the bolt cycle and there is in fact a BB in gun ready to fire, though. It also way be helpful to mention that I lost the stock spring for the magazine catch, but found a similar replacement. I don't know how this would effect the feeding issues, but I thought it might be good to tell. If any of you have ideas on how to fix this, please post. Thanks in advance.