Today I got a completely new L96 off of airsplat. I put the barrel and the body togethor and went to lock the bolt and it won't lock. The trigger won't pull back either.
Oh yea, and when I opened the box the bbs were everywhere-is it possible a bb got stuck somewhere?
Any suggestions?
TN Airsoft Forums
Airsoft forum dedicated to promoting collaboration among active Airsoft enthusiasts within the TN area.
New AGM L96 AWP Won't Shoot
Moderators: dogsoldier, Skidude, Sniper
2 posts • Page 1 of 1
Re: New AGM L96 AWP Won't Shoot
by Romellio » Mon Oct 05, 2015 11:28 pm
Impressive work sir its really good to hear this information thanks, and congrats for your interesting shoot.
I have the L96 and I took it apart to take off the air restrictor nozzle. Turns out, it wasn't in there, and I put my gun back together. I noticed this little spring that's on the side of the gearbox, and it was sticking out, and it wasn't like that. without that spring, my gun won't shoot. I have it taped in there being held in. -note: i's not the bolt spring-. IF anyone knows anything, little, or big, please let me know! Thanks
I have the L96 and I took it apart to take off the air restrictor nozzle. Turns out, it wasn't in there, and I put my gun back together. I noticed this little spring that's on the side of the gearbox, and it was sticking out, and it wasn't like that. without that spring, my gun won't shoot. I have it taped in there being held in. -note: i's not the bolt spring-. IF anyone knows anything, little, or big, please let me know! Thanks
-
Romellio - Posts: 1
- Joined: Tue Sep 29, 2015 12:20 am
- Location: 123 street
2 posts • Page 1 of 1
Who is online
Users browsing this forum: No registered users and 1 guest