M4 flash hider

[wawa456]

How do you take off the echo 1 m4 flash hider? i mean i take off that rlllllllllyyyy small screw on bottom and then i turn it the opposite direction that u need a normal screw to but it wont come off, does echo1 glue their flash hider on and how do you get it off if it is glued

[cypher]

Most likely it's glued on if you can't get it off after you take the set screws out. If you happen to have a heat gun laying around hit the flash hider with some heat for a couple minutes and it should come off fairly easy.

[Hal9000]

I've got one of their m4's, and I had that problem when I first got it. There should be a little tiny pin on the left or right that you have to push out. After you get that out, run it under hot water or a blow dryer for about ten minutes; this should loosen the glue.