Which Tightbore Barrel Length?

[C0L0N3L $aNd3rS]

If you want a 509, wouldn't you need a type 0 cylinder?

[Ares51]

I should think I would not have any problems with a modify 120 in the gun (which is giving me about 410 with .25s) and the fact that it is a 2gx gearbox. Also are you saying that a 509 would be overkill and something like a 455 would give the same performance at longer distances? Thanks for all the help guys.

[Dannick]

Not only that, but it will probably stick out of the tip of the silencer unless you get a pretty large one.

[Beachmeister]

[Death]

I've heard of it and have read plenty about it.

I haven't researched it in years, so I took your advice in your PM and googled it. The first link that pops up using 'barrel suck' as the search terms is here:

http://www.airsoftsociety.com/forums/f37/bore-up-2022/

Eh?

[Nicodemus]

[paches]

Barrel length is pretty negligible from my experience, however the build quality greatly effects performance.....I've used CA (6.04), Madbull (6.03), Prometheus (6.04), and DBC (6.01) to name a few (I listed them from worst to best).

If I were you I would get a DBC 6.01 in your standard length.

[Lancer]

Adding barrel length beyond about 300mm will not matter. Past that point a a 509 and a 300 will shoot virtually the same and the only difference being you now have to swap cylinders and use a silencer to cover your barrel.

Hopup components also play a huge part in overall accuracy and should not be overlooked when doing upgrades such as these.