Ok so This is all the gear I'm getting for my new load out. Just wanting to get some opinions on it all.
http://www.airsoftpost.com/product_info ... s_id=35271
http://www.airsoftgi.com/product_info.p ... ts_id=3913
http://www.airsoftgi.com/product_info.p ... ts_id=3646
http://www.airsoftpost.com/product_info ... s_id=27689
http://www.airsoftpost.com/product_info ... s_id=34371
http://www.airsoftgi.com/product_info.p ... ts_id=8513
http://www.airsoftgi.com/product_info.p ... ts_id=1110
http://www.airsoftgi.com/product_info.p ... ts_id=5725
http://www.airsoftgi.com/product_info.p ... ts_id=5091
So my question is would a battle belt really be needed? Cause I need somewhere to put a dump pouch and a place to strap my pistol holster to. Also, is the MPS vest a better choice than a plate carrier? Cause I am going for a spec ops look.
TN Airsoft Forums
Airsoft forum dedicated to promoting collaboration among active Airsoft enthusiasts within the TN area.
My new load out
Moderators: dogsoldier, Skidude, Sniper
10 posts • Page 1 of 1
My new load out
by -EAF- » Tue Jul 19, 2011 5:32 pm
Death Before Dishonor.
Strength And Honor
Guns:
Trying to build my collect back up
Strength And Honor
Guns:
Trying to build my collect back up
-
-EAF- - AirsoftVet
- Posts: 879
- Joined: Sun Jul 19, 2009 6:40 pm
- Location: South Knoxville
Re: My new load out
by trevorst » Tue Jul 19, 2011 6:09 pm
I have that mesh mask (well similiar mine isnt the Matrix branded one..) thought I would hate it but.... I love it. Mine is multicam, dont leave it out in the heat its only hot glued together and will come undone if left in a car trunk or etc...
Tokyo Marui M14 SOCOM DMR
PolarStar Fusion Custom SR25
Lots more....
Μολὼν λαβÎ
....If in doubt pinkie out.
Greater is an army of sheep led by a lion, than an army of lions led by a sheep - Alexander the Great
PolarStar Fusion Custom SR25
Lots more....
Μολὼν λαβÎ
....If in doubt pinkie out.
Greater is an army of sheep led by a lion, than an army of lions led by a sheep - Alexander the Great
-
trevorst - Posts: 891
- Joined: Sat Aug 14, 2010 2:51 pm
Re: My new load out
by -EAF- » Tue Jul 19, 2011 6:23 pm
Death Before Dishonor.
Strength And Honor
Guns:
Trying to build my collect back up
Strength And Honor
Guns:
Trying to build my collect back up
-
-EAF- - AirsoftVet
- Posts: 879
- Joined: Sun Jul 19, 2009 6:40 pm
- Location: South Knoxville
Re: My new load out
by Smartkid312 » Tue Jul 19, 2011 7:13 pm
What kind of rig do u want high speed low drag or high drag low speed. For the mps go Pantac and u also might want to invest in a hydration carrier. The battle belt isn't really necessary but u also will have to get a riggers, or similar, belt and most people reccomend a h-harness. The tactical tailor mav is a great choice and the mask is a great thing to.
Jg g3 foregrip on the side and some sparying and praying. Now an m4 shooting 30 rps and maybe even more. Go team cold blooded rangers! When I'm playing on black team you can call me Tapout(thanks to gunny aw gunny). HOOAH!
- Smartkid312
- Posts: 243
- Joined: Tue Nov 23, 2010 7:12 am
Re: My new load out
by -EAF- » Tue Jul 19, 2011 7:32 pm
Death Before Dishonor.
Strength And Honor
Guns:
Trying to build my collect back up
Strength And Honor
Guns:
Trying to build my collect back up
-
-EAF- - AirsoftVet
- Posts: 879
- Joined: Sun Jul 19, 2009 6:40 pm
- Location: South Knoxville
Re: My new load out
by Aegis » Tue Jul 19, 2011 7:40 pm
The main difference between speed/drag setups is weight and amount of equipment you carry. Carry a small chest rig to move faster and be lighter/cooler, or tank it out in a full plate carrier loaded with molle pouches
- Aegis
- Posts: 90
- Joined: Fri Jun 04, 2010 11:12 am
Re: My new load out
by -EAF- » Tue Jul 19, 2011 7:44 pm
Ah ok. Yeah I'm going for the lighter/cooler aspect. I'm not a heavy weapons guy lol.
I'm also looking for some good boots that can handle water really well. I am going to buy some quick dry socks soon, just need some good boots.
I'm also looking for some good boots that can handle water really well. I am going to buy some quick dry socks soon, just need some good boots.
Death Before Dishonor.
Strength And Honor
Guns:
Trying to build my collect back up
Strength And Honor
Guns:
Trying to build my collect back up
-
-EAF- - AirsoftVet
- Posts: 879
- Joined: Sun Jul 19, 2009 6:40 pm
- Location: South Knoxville
Re: My new load out
by Smartkid312 » Tue Jul 19, 2011 7:52 pm
Magnum are some of the best boots out there. For a really high speed low drag rig u could just do the battle belt and a h-harness of course with a riggers belt and add the pouches u want.
Jg g3 foregrip on the side and some sparying and praying. Now an m4 shooting 30 rps and maybe even more. Go team cold blooded rangers! When I'm playing on black team you can call me Tapout(thanks to gunny aw gunny). HOOAH!
- Smartkid312
- Posts: 243
- Joined: Tue Nov 23, 2010 7:12 am
Re: My new load out
by -EAF- » Tue Jul 19, 2011 7:56 pm
Death Before Dishonor.
Strength And Honor
Guns:
Trying to build my collect back up
Strength And Honor
Guns:
Trying to build my collect back up
-
-EAF- - AirsoftVet
- Posts: 879
- Joined: Sun Jul 19, 2009 6:40 pm
- Location: South Knoxville
Re: My new load out
by chrisdetrin » Wed Jul 20, 2011 7:40 pm
your going to look like a martini olive.
  ▲
▲ ▲
guns:Asahi M60,TM P90,TM m16a1 with King arms M203,TM Glock 26, KWA sr-10 with CA m203, Echo1 249,m4a1,UTG l96s, UTG trishot.
▲ ▲
guns:Asahi M60,TM P90,TM m16a1 with King arms M203,TM Glock 26, KWA sr-10 with CA m203, Echo1 249,m4a1,UTG l96s, UTG trishot.
-
chrisdetrin - Posts: 1759
- Joined: Mon Sep 21, 2009 11:17 am
10 posts • Page 1 of 1
Who is online
Users browsing this forum: No registered users and 26 guests