If you could make a completely custom gun what would you do.

[Smartkid312]

If you could completely build your own custom gun from the ground up what would you build. You can go really in depth and give complete external and internal features or you could go not as much in depth and just list the weapon type or maybe just external features. Also money is not a factor in this you can go expensive as you want. Another thing is that you could just list a regular gun of your choosing and tell us what upgrades you would do with it. For my gun I would use a fully traded marked g&p metal body a madbull noveske m4 length outer barrel a daniel defense ris a socom gear noveske flashider a socom gear sopmod stock with a g&p buffer tube some magpul mbus sights a real eotech with a real eotech magnifier a spr grip and a systema gearbox shell prom high speed gears super core piston a completely prom air seal system some systema bearings a systema low resistance wire set a prom air nozzle a prom m90 spring and have it wired to deans with a 11.1 volt 20c 2500 mah lipo also a tm hop unit and a pdi 6.01 m4 length outer barrel.

[Dannick]

Some punctuation could go a long way.

[Aegis]

A rifle design from one of the mass effect video games with a few personal changes. the automatic collapsing/expanding stocks, and have it laced with magnets and embed some magnets on my vest. Then I don't need a sling, Just attach it with the magnets. The top of the gun would be smooth but have a scope inserted. Just behind the scope, almost under it would be a small lcd counter displaying ammo left in the magazine and battery power. The pistol grip and trigger area would remain largely standard, but the fire selector area would be an RFID sensor on 1 side, and a thin keypad on the other to control settings like the lcd's counter, rof etc. RFID chip would be embedded in my gloves or my watch and would be needed to allow use unless override card is used before the game. Battery would be custom made like cellphone and other electronic devices to simply plug or dock into the gun, but it would be the size of the relatively small g36/sl-8 sniper magazine. It would fit flush into the gun right in front of the trigger area. Ammo would be top fed from a magazine inserted flush into the gun's body right above the trigger area. When I say inserted in, I don't mean inserted from the top, but rather slid in from the side. A solid flap similar to a dust cover would close over it, or be closed when it's removed to keep particles from entering.

BBs would be red tracers, and in going with the idea of a somewhat bullpup gun with alot of parts remaining flush in design, the barrel and tracer components would end at the end of the gun's front. Frankly I would have to draw this thing for it to make sense, but with an unlimited supply of funding??? YEAH BOI

[ProfessorCrow]

[Aegis]

[ProfessorCrow]

Let's just say the base gun is going to be Daytonagun LMG, but I have some serious plans in mind.

-CroW

[zackattack]

[chrisdetrin]

mine would be a inline P90 with 3 lasers so when i pressed them on it look like the predator was about to kill you and it rip about 100 rounds a second at 400 fps, done off a split hose that feeds both said p90 and an asahi m60

[trevorst]

[chrisdetrin]

[shadow99117]